Kaizen Star - Plant 1
Aakash Reddu
April - 2024
Total1
| Sr. No | Kaizen No | Kaizen Theme | Initiator | Team | Before Situation |
After Situation |
Month | ||
| 1 | LCIK - 39905 |
reduce sim fail |
Kartik Rautela , 55955 |
Raj kamal yadav , 51008653 Ashish Kr Singh , 55586 |
DUE TO SIM PIN BEND WE HAVE OBSERVED 0.5% REJECTION OF SIM FAIL IN A7 TORCH | NOW WE HAVE ADDED TAPE AT STENCIL TO IMCREASE THE HEIGHT OF THE PASTE AT SIM PAD ..EARLIER 90 um WAS THE HEIGHT WHICH IS INCREASED TO 150. | 03/2024 | ||
| 2 | LCIK - 38126 |
Reduce SCRAP Value |
, 57676 |
Rahul MahaKud , 166030 |
|
If there is a stacking level to keep the material on the material trolley that would have been in the packing, then the material will not get scraped by fall. | 02/2023 | ||
| 3 | LCIK - 43856 |
Reduce scrap rejection in probuds |
ANMOL KUMAR , 51009240 |
Manish kumar singh , 51008225 |
Model probuds T24, T12 and T31 do not have a jig to remove the middle case from the charging case when a defect occurs, which causes the charging case and middle case to be damaged and the part to be scrapped while removing. | In model Probuds T51, a jig has been provided to the repair team to remove the middle case from the charging case, with the help of which the middle case can be removed very easily and no part gets damaged. Similarly, if a jig is provided in all Probuds, then no part will get damaged. | 03/2026 | ||
| Previous 415 416 417 418 419 Next | |||||||||
Training Material
Awards
